Author Topic: Turbulence on a beer cup doesn't work  (Read 36 times)

adstudios

  • Newbie
  • *
  • Posts: 1
    • View Profile
Turbulence on a beer cup doesn't work
« on: April 04, 2021, 10:57:09 PM »
Increasing turbulence 1, turbulence 2, and turbulence (of the foam) usually will form waves on top of the liquid. If you open up the Cylinder demo scene and remove the RandomRotation and CameraAnimator scripts, and increase those three turbulence, the result will be like as shown in the attachment. This is exactly what I want: waves.

However, I am working on using the same cup of the Beer demo scene. If you open up the Beer demo scene, even if you increase all the three turbulences to the max, all it does it making the top of the liquid to go up and down without any waves. How can I fix this?

Thank you very much.

Kronnect

  • Administrator
  • Hero Member
  • *****
  • Posts: 6851
    • View Profile
Re: Turbulence on a beer cup doesn't work
« Reply #1 on: April 05, 2021, 09:23:34 AM »
In addition to those Turbulence settings, increase the Frequency value (under Turbulences 1 and 2 settings). In this case you may need to increase it to 200 or more due to this model particular scale.